"Properly applied SPF 50 sunscreen blocks 98 percent of UVB rays, while an SPF 30 sunscreen blocks 97 percent of sunburn rays – the difference being one percentage point."
SPF stands for Sun Protection Factor. In theory, an SPF 50 sunscreen would allow users to stay out in the sun fifty times longer than they normally could without sunscreen, while SPF 30 would imply that users can stay out thirty times longer before getting sunburned. But for high SPF sunscreens, theory and reality are two different things.
People often assume that they are given almost twice the amount of protection by applying an SPF 50 sunscreen compared to one that has SPF 30. This is not true, since the extra protection offered by a higher SPF value is negligible after SPF 15. Properly applied SPF 50 sunscreen blocks 98 percent of UVB rays, while an SPF 30 sunscreen blocks 97 percent of sunburn rays – the difference being one percentage point.

Stating a high SPF number on a sunscreen can result in people having a false sense of security. So, let’s dive into some of the research that has been conducted on the topic.
An SPF test conducted by Procter and Gamble illustrates the problem of high SPF. They sent a competitor's SPF 100 sunscreen to five different laboratories for testing, saying that the expected SPF should be between SPF 20 and SPF 100. It turned out that the SPF results varied between SPF 37 and SPF 75 (interestingly, the sunscreen was not tested as SPF 100 at any of the labs).
In the next step, the same five labs received another sunscreen while being told that the expected SPF was 80. Three labs returned with results that were close to SPF 80. The other two labs confirmed an SPF of 54 and 70 respectively.
The explanation was that minuscule differences in testing conditions can dramatically change the result. For instance, a 1.7% change in light transmission can result in a measured SPF of 37 instead of 100, and small variations in the amount of sunscreen applied can result in similar discrepancies between test results. Because the SPF scale is non-linear, the fluctuation in test results become higher the higher the SPF.
The Environmental Working Group (EWG) has conducted their own tests and confirmed the limited reliability of SPF tests. According to the EWG, most sunscreens that they tested themselves only offered 42 to 59% of the claimed SPF.

In vivo SPF tests are conducted with human test subjects. To determine the SPF they literally apply the sunscreen on 10 different subjects with different skin types and then evaluate after which amount of time the skin gets burned. The test is therefore naturally prone to error.
In 2019, the ISO test specifications were updated to be able to guarantee standardized results with a higher likelihood:
⇒ The sunscreen has to be applied in drops (at least 15 drops per 30 square centimeters)
⇒ The drops have to be spread circularly and then up and down and then side to side
⇒ The process of spreading the sunscreen on the skin has to be 30 to 40 seconds
⇒ Through the whole process the gloved finger shouldn’t leave the skin
⇒ The people who decide if the skin is burnt or not have to have their colour vision checked (it’s recommended that they get rechecked every year)
⇒ Instead of having an expert classify the skin colour, this is measured by a machine; there’s a limit on the specific skin colours of volunteers and the average has to be within a certain limit
⇒ The lamps that are used in UV testing shine a circle of UV onto the skin
⇒ they have to give out the same amount of UV a consistent amount over the area of the circle
Since the tests are conducted on human subjects by human lab assistants, a certain margin of error remains. For example the person applying the sunscreen is supposed to apply "light pressure". This is impossible to standardize.
Several companies and organisation have therefore suggested banning high-SPF sunscreens, and suggested more reliable testing methods that don't involve human test subjects.
A product’s actual sun protection is determined by its ability to protect you from both UVB and UVA rays. UVB rays make you tanned, and too much exposure to them has been correlated to the emergence of skin cancer. UVA rays suppress the immune system, lead to the creation of harmful free radicals in the skin, and exposure to them may also lead to skin cancer. Unlike UVB rays, UVA rays do not make you tanned or redden your skin. Therefore, it is impossible to know whether you have been exposed to a risky amount of UVA rays.
Zinc Oxide — the compound used in Suntribe’s sunscreen — is a mineral UV filter that offers natural protection against both UVA and UVB rays.

One of the lesser-known issues with high SPF sunscreens is their poor performance when it comes to UVA protection. SPF values only reflect protection against UVB rays—the ones that cause visible sunburn. UVA rays, on the other hand, don’t leave a trace on the skin until long after the damage is done. They penetrate deeper, accelerating skin aging, triggering oxidative stress, and contributing to the development of skin cancer.
What makes this especially concerning is that studies have shown many high SPF sunscreens fall short on UVA protection—some providing only a quarter of the UVA coverage needed in relation to their labeled SPF. This means you could be shielding your skin from burns while still exposing yourself to long-term, invisible harm.
Even worse, the sense of security offered by these products often leads to riskier sun behavior: people stay out longer, apply less product, and forget to reapply, all while assuming they’re getting maximum protection. Additionally, to meet the demands of higher SPF labels, manufacturers must rely on larger amounts of chemical UV filters—often in complex combinations.
High SPF products may come with significant health risks, since the concentration of UV-filtering chemicals is much higher than in products with lower SPF values. The higher the SPF, the more likely it is that your sunscreen contains chemical UV-filters.
This increases the likelihood of skin irritation, allergic reactions, and systemic absorption. Ingredients like Oxybenzone and Octinoxate, commonly used in SPF 50+ products, have been detected in the bloodstream long after use and are known for potential hormone-disrupting effects and tissue damage. Therefore it makes a whole lot of sense to always check the safety of the UV-filters and other ingredients used, and consider SPF 20 and SPF 30 sunscreens as alternatives. You don't necessarily need an SPF 50 sunscreen.

Since an SPF value above 30 requires the use of additional, potentially harmful ingredients, they can also be a threat to the environment.
When sunscreen is applied and you go swimming in the ocean or you take a shower, it washes off your skin and ends up in your surroundings. This for example could be coral reefs, on your summer vacation at the beach, threatening their health by bleaching their tissue and endangering the integrity of ocean life. Keep in mind that waste water ends up in the environment also and therefore the chemicals within.
In this context, high SPF sunscreens may do more harm than good—both to you and the planet.

While SPF 30 already blocks approximately 97% of UVB radiation when applied correctly, SPF 50 offers even higher protection, blocking approximately 98%. The difference may seem small, but that extra protection can be particularly valuable during prolonged sun exposure, outdoor sports, or for people with sun-sensitive skin.
At Suntribe, our goal has always been to develop high-performing mineral sunscreens using 100% natural ingredients. As our formulations have evolved, so has our product range. Today, most of our sunscreens offer SPF 50 protection, reflecting the growing demand for higher sun protection without compromising our approach to ingredients.
Our SPF 50 range includes our Active Mineral Sunscreen SPF 50, designed for outdoor activities and water sports, and our lightweight Mineral UV Shield SPF 50 for everyday facial protection.
For surfers and outdoor enthusiasts, we also offer our colourful Zinc Sun Sticks SPF 50, Face & Sport Zinc Sunscreens SPF 50 in metal tins, and convenient Mini Zinc Sunscreens SPF 50. Our Mineral Zinc Lip Balm SPF 50 provides additional protection for sun-exposed lips.
We also continue to offer SPF 30 sunscreens, including our Baby & Kids Mineral Sunscreen SPF 30, our Tinted Mineral Sunscreen SPF 30, and our Tinted Lip Balm SPF 30, as well as our Mineral Day Cream SPF 20 for everyday skincare.
So, should you choose SPF 30 or SPF 50? Both can provide excellent sun protection when applied correctly. The best choice depends on your skin, the intensity of UV exposure, and your planned activities. What matters most is applying enough sunscreen, reapplying regularly, and combining sunscreen with other sun protection measures.
Whether you prefer SPF 30 or SPF 50, our approach remains the same: effective mineral sun protection made with carefully selected natural ingredients.